View D64569-007_4787169.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

intel ? server board s5000vcl technical product specification intel order number: D64569-007 revision 2.3 january 2008 enterprise platforms a nd services division - marketing
intel ? server board s5000vcl tps table of contents revision 2.3 intel order number: D64569-007 iii revision history date revision number modifications sept. 2006 1.0 initial release. nov. 2006 2.0 added technical updates and sas board information. jan. 2007 2.1 removed processor that is not supported by board; added post-code diagnostic led information. sept. 2007 2.2 updated product codes and processor information. jan. 2008 2.3 updated processor information. disclaimers information in this document is provided in connection with intel ? products. no license, express or implied, by estoppel or ot herwise, to any intellectual pr operty rights is granted by this document. except as provided in intel's terms a nd conditions of sale for such products, intel assumes no liability whatsoever, and intel disclaims any express or implied warranty, relating to sale and/or use of intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infrin gement of any patent, copyright or other intellectual property right. intel products are not intended for use in me dical, life saving, or life su staining applications. intel may make changes to specifications and pr oduct descriptions at any time, without notice. designers must not rely on the absence or characteri stics of any features or instructions marked "reserved" or "undefined." intel reserves t hese for future definition and shall have no responsibility whatsoever fo r conflicts or incompatibilities aris ing from future changes to them. the intel ? server board s5000vcl may contain design defects or errors known as errata which may cause the product to deviate from publis hed specifications. current characterized errata are available on request. intel corporation server baseboards support per ipheral components and contain a number of high-density vlsi and power delivery component s that need adequate airflow to cool. intel?s own chassis are designed and tested to meet the intended thermal requirements of these components when the fully integrated system is use d together. it is th e responsibility of the system integrator that chooses not to use in tel developed server building blocks to consult vendor datasheets and operating parameters to dete rmine the amount of air flow required for their specific application and environmental conditions. intel corporation can not be held responsible if components fail or the server boar d does not operate correctly when used outside any of their published operating or non-operating limits. intel, pentium, itanium, and xeon are trademarks or registered trademarks of intel corporation. *other brands and names may be claimed as the property of others. copyright ? intel corporation 2008.
table of contents intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 iv table of contents 1. introduction ................................................................................................................... ....... 1 1.1 server board use disclaimer .................................................................................. 1 2. product overview.......... ............... ............... ............... ............... ............... ............... ........... .. 2 2.1 feature set .............................................................................................................. 2 2.2 server board layout................................................................................................ 3 2.2.1 intel ? light-guided diagnostics led locations....... ............. ............ ............ ........... 4 2.2.2 external i/o connector locations.. .............. ............ ............ ............. ............ ........... 5 3. functional architecture ........ ............... ............... ............... ............... ............ ............ ........... 6 3.1 intel ? 5000v memory controller hub (mch) ........................................................... 8 3.1.1 system bus interface............................................................................................... 8 3.1.2 processor support ........... ............... ............... ............... ............... ............... ............. 8 3.1.3 memory sub-system .............................................................................................. 10 3.2 intel ? 6321esb i/o controller hub ........................................................................ 12 3.2.1 pci sub-system.......... ............... ............... ............... ............. ............ ............ ......... 13 3.2.2 serial ata support .......... ............... ............... ............... ............... ............... ........... 13 3.2.3 parallel ata (pata) support .... ............... ............... ............ ............. ............ ......... 14 3.2.4 usb 2.0 support....... ............... ............... ............... .............. ............. ............ ......... 14 3.3 video support ............. ............... ............... ............... ............ ............. ............ ......... 14 3.4 network interface controller (nic) ........................................................................ 15 3.4.1 intel ? i/o acceleration technolgy ... ............... ............... ............... ............... ........... 16 3.5 super i/o ............................................................................................................... 16 4. platform management........................................................................................................ 19 5. connector / header locations and pin-outs.................................................................... 20 5.1 board connectors............ ............... ............... ............... ............... ............... ........... 20 5.2 power connectors ................................................................................................. 21 5.3 riser card slots..................................................................................................... 22 5.4 ssi control panel connector........ ............... ............ ............ ............. ............ ......... 22 5.5 i/o connector pinout definition .... ............... ............ ............ ............. ............ ......... 23 5.5.1 vga connector........... ............... ............... ............... ............ ............. ............ ......... 23 5.5.2 nic connectors ............... ............... ............... ............... ............... ............... ........... 23 5.5.3 ide connector ....................................................................................................... 24 5.5.4 sata connectors ............ ............... ............... ............... ............... ............... ........... 25
intel ? server board s5000vcl tps table of contents revision 2.3 intel order number: D64569-007 v 5.5.5 serial port connectors... ............... ............... ............ ............ ............. ............ ......... 26 5.5.6 keyboard and mouse connector ......... ............... ............... ............... ............ ......... 26 5.5.7 usb connector...................................................................................................... 27 5.6 fan headers ............. ............... ............... ............... .............. ............. ............ ......... 28 6. jumper block settings ...................................................................................................... 29 6.1 recovery jumper blocks ....................................................................................... 29 6.1.1 cmos clear and password reset usage procedure ........................................... 30 6.1.2 bmc force update procedure ....... ............... ............... ............... ............... ........... 31 6.2 bios select jumper .............................................................................................. 31 6.3 pcie select jumper............................................................................................... 32 7. intel ? light guided diagnostics ............... ............... ............ ............ ............. ............ ......... 33 7.1 5-volt standby system status / fault led ............................................................ 33 7.2 dimm leds ........................................................................................................... 35 7.3 post code diagnostic leds ......... ............... ............ ............ ............. ............ ......... 36 8. power and environmental specifications........................................................................ 37 8.1 intel ? server board s5000vcl design specificati ons ............. ............. .......... ...... 37 8.2 baseboard power requirements .... ............... ............... ............... ............... ........... 38 8.2.1 processor power support...................................................................................... 38 8.2.2 power supply output requirement s ............. ............... ............... ............... ........... 38 8.2.3 turn on no load operation ......... ............... ............ ............ ............. ............ ......... 39 8.2.4 grounding .............. ............... ............... ............... ............... ............... ............ ......... 40 8.2.5 standby outputs .............. ............... ............... ............... ............... ............... ........... 40 8.2.6 remote sense ....................................................................................................... 40 8.2.7 voltage regulation .......... ............... ............... ............... ............... ............... ........... 40 8.2.8 dynamic loading ............. ............... ............... ............... ............... ............... ........... 41 8.2.9 capacitive loading .......... ............... ............... ............... ............... ............... ........... 41 8.2.10 closed-loop stability....... ............... ............... ............... ............... ............... ........... 41 8.2.11 common mode noise ............................................................................................ 41 8.2.12 ripple / noise ........................................................................................................ 42 8.2.13 soft starting ........................................................................................................... 42 8.2.14 timing requirements............................................................................................. 42 8.2.15 residual voltage immunity in standby mode ..... ............... ............... ............ ......... 44 9. regulatory and certification information......................................................................... 45 9.1 product regulatory compliance ... ............... ............ ............. ............ ............ ......... 45 9.1.1 product safety compliance ....... ............... ............... ............. ............ ............ ......... 45
table of contents intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 vi 9.1.2 product emc compliance ? class a compliance .. ............. ............. ............ ......... 46 9.1.3 certifications / registrations / declarations ........................................................... 46 9.2 product regulatory compliance markings ......... ............... ............... ............ ......... 47 9.3 electromagnetic compatibility no tices ............... ............... ............... ............ ......... 48 9.3.1 fcc verification statement (usa) ........................................................................ 48 9.3.2 ices-003 (canada) ......... ............... ............... ............... ............... ............... ........... 49 9.3.3 europe (ce declaration of conformity) ............ ............... .............. ............... ......... 49 9.3.4 vcci (japan) ............ ............... ............... .............. ............... ............. ............ ......... 49 9.3.5 bsmi (taiwan) ....................................................................................................... 50 9.3.6 rrl (korea)........................................................................................................... 50 9.3.7 cnca (ccc-china) ............................................................................................... 50 9.4 restriction of hazardous substances (rohs) compliance................................... 51 appendix a: integration and usage tips................................................................................ 52 appendix b: sensor tables ..................................................................................................... 5 3 appendix c: post error messages and handling ................................................................ 55 appendix d: post code diagnostic led decoder ............ ............... ............... ............ ......... 58 appendix e: supported intel ? server chassis ............. ............ ............ ............. ............ ......... 62 glossary............. .............. ............... ............... ............. ............ ............. ............ ............ .............. 64 reference documents ............................................................................................................ .. 67
intel ? server board s5000vcl/s5000vclsasbb tps list of figures revision 2.3 intel order number: D64569-007 vii list of figures figure 1. components and connector lo cation diagram........... .............. ............. ............ ........... 3 figure 2. intel ? light-guided diagnostics led locations...... .............. ............... ............... ........... 4 figure 3. atx i/o layout ....................................................................................................... ....... 5 figure 4. functional block diagram.... ............... ............... ............... .............. ............... ............... .7 figure 5. cek processor mounting ...... ............... ............... ............... ............... ............... ............. 9 figure 6. memory layout ........................................................................................................ .... 10 figure 7. smbus block diagram................................................................................................ 19 figure 8. recovery jumper blocks (j3a1, j1c2, j1c4 )............................................................. 30 figure 9. system status / fault led location ............................................................................ 33 figure 10. dimm led locations................................................................................................. 3 5 figure 11. post code diagnostic led location ............. ............ ............ ............. ............ ......... 36 figure 12. output voltage timing ....... ............... ............... ............... .............. ............... .............. 43 figure 13. turn on/off timing (power supply signals). ............... ............. ............ ............ ......... 44 figure 14. diagnostic led placement diagram ............... ............ ............ ............. ............ ......... 58 figure 15. intel ? server system sr1530cl/sr1530clr .......................................................... 62 figure 16. intel ? server system sr1530hcl/s r1530hclr............ ............... ............... ........... 63
list of tables intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 viii list of tables table 2. i 2 c addresses for memory module smb ...................................................................... 10 table 3. maximum six-dimm system memory config uration ? x4 single rank ........................ 10 table 4. maximum six-dimm system memory config uration ? x8 dual rank........................... 11 table 5. pci bus segment characteristics................................................................................. 13 table 6. video modes .......... ............... ............... ............... ............... ............ ............ ............. ...... 15 table 7. nic2 status led....................................................................................................... .... 16 table 8. serial a port header pin-out (external db9) ................................................................ 17 table 9. internal serial b port header pin-out.......... ............... ............... ............... ............ ......... 17 table 10. board connector matrix ...... ............... ............... ............... ............... .............. .............. 2 0 table 11. power connector pin-out (j3k3) ................................................................................ 21 table 12. 12v power connector pin-out (j9e1)......................................................................... 21 table 13. power supply signal connector pin-out (j9c1) ........... ............ ............. ............ ......... 22 table 14. front panel ssi standard 24-pin connector pin-out (j2k2) ............ ............... ........... 22 table 15. vga connector pin-out (j7a1)................................................................................... 23 table 16. rj-45 10/100/1000 nic connec tor pin-out (ja6a1, ja5a1).... ............. ............ ......... 23 table 17. 44-pin ide connector pin-out (j2k5) ............ ............... ............ ............. ............ ......... 24 table 18. sata connector pin-out (j1j2, j1j1) ........... ............... ............ ............. ............ ......... 25 table 19. sata / sas connector pi n-out (j1g2, j1g1, j1f1, j1e4)... ............. ............... ......... 25 table 20. 9-pin serial header pin-out (j8a1, j1a1)................................................................... 26 table 21. stacked ps/2 keyboard and mouse port pin- out (j9a2) ....... ............... ............ ......... 26 table 22. external usb connector pin-out (j9a2)........ ............... ............. ............ ............ ......... 27 table 23. internal usb connector pin-out (j3k1) ...................................................................... 27 table 24. cpu fan connector pin-out (j2k3, j2k4) ............ ............... .............. ............... ......... 28 table 25. pci fan connector pin-out (j1k1) ............................................................................. 28 table 26. recovery jumpers (j3a1, j1c1, j1c2)...................................................................... 29 table 27. bios select jumper (j3a2) ....................................................................................... 32 table 28. pci express* x4/x8 select jumper (j1e1) ................................................................. 32 table 29. server board design specifications ........................................................................... 37 table 30. dual-core intel ? xeon ? processor 5100 series and quad-core intel? xeon? processor 5300 series tdp guidelines................................................................................ 38 table 31. 400w load ratings ............ ............... ............... .............. ............... ............... .............. 39 table 32. no-load operating range ........................................................................................... 39
intel ? server board s5000vcl tps list of tables revision 2.3 intel order number: D64569-007 ix table 33. voltage regulation limits ........................................................................................... 4 0 table 34. transient load requirements. ............. ............... ............... ............... ............... ........... 41 table 35. capacitive loading conditions .. ............... ............... ............... ............... ............ ......... 41 table 36. ripple and noise.............. ............... ............... ............... ............... ............... ............ .... 42 table 37. output voltage timing ................................................................................................ 42 table 38. turn on/off timing ................................................................................................... .. 43 table 39. post error messages and hand ling........... ............... .............. ............. ............ ......... 55 table 40. post error beep codes ...... ............... ............... ............... ............... ............... ........... 57 table 41. bmc beep codes ............... ............... ............... ............... .............. ............... .............. 57 table 42. example post progress code led .......................................................................... 58 table 43. diagnostic led post code decoder .............. ............ ............ ............. ............ ......... 59
list of tables intel ? server board s5000vcl/s5000vclsasbb tps intel order number: D64569-007 revision 2.3 x < this page intentionally left blank. >
intel ? server board s5000vcl tps overview revision 2.3 intel order number: D64569-007 1 1. introduction this technical product specification (tps) provides board-specific information about the features, functionality, and high-le vel architecture of the intel ? server board s5000vcl. see the intel ? 5000 series chipsets server board family datasheet more information about board sub- systems, including chipset, bios, system management, and system management software. there are four product codes of the intel server board s5000vcl: ? ss5000vcl ? s5000vclsasbb ? bbs5000vclr ? bbs5000vclsasr all references to the intel ? server board s5000vcl refer to all product codes listed above, unless noted otherwise. 1.1 server board use disclaimer intel corporation server boards support add-in peripherals and contain high-density vlsi and power delivery components that need adequate airflow to cool. intel ensures through its own chassis development and testing that when intel server building blocks are used together, the fully integrated system will meet the intended t hermal requirements of these components. it is the responsibility of the system integrator who chooses not to use intel developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of air flow required for their specific applicat ion and environmental conditions. intel corporation cannot be held responsible if components fail or the server board does not operate correctly when used outside any of their publi shed operating or non-operating limits.
product overview intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 2 2. product overview the intel ? server board s5000vcl is a monolithic pr inted circuit boards t hat support the high- density 1u server market. 2.1 feature set feature description processors 771-pin lga sockets supp orting one or two dual-core intel ? xeon ? processors 5100 series, low-voltage quad-core ? xeon ? processors 5300 series, and low-voltage quad- core ? xeon ? processors 5400 series with system bus speeds of 1066 mhz or 1333 mhz. for a complete list of supported processors, see the following link: http://support.intel.com/support/motherboards/server/s5000vcl memory six keyed dimm slots support fully buffered dimm technology (fbdimm) memory. 240- pin ddr2-677 fbdimms must be used. chipset intel ? 5000v chipset family, which includes the following components: ? intel ? 5000v memory controller hub ? intel ? 6321esb i/o controller hub on-board connectors / headers external connections: ? stacked ps/2* ports for keyboard and mouse ? two rj45 nic connectors for 10/100/1000 mb connections ? two usb 2.0 ports ? video connector ? com 1 or serial a (db9) internal connectors/headers: ? one usb port header, capable of providing two usb 2.0 ports ? one dh10 serial b header ? six sata ports or four sas ports via the intel ? 6321esb i/o controller hub. these ports support 3gb/s and integrated sw raid 0 or 1 ? one 40-pin (power + i/o) ata/100 c onnector for optical drive support ? ssi-compliant 24-pin control panel header ? ssi-compliant 24-pin main power connec tor support the atx-12 v standard on the first 20 pins ? 8-pin +12 v processor power connector add-in pci, pci-x*, pci express* cards one pci super-slot that will support one 1u riser card with one pci-x* and one pci express* connectors on-board video ati* es1000 video controller with 16 mb ddr sdram on-board hard drive controller six 3 gb/s sata ports, or four sas ports intel ? embedded server raid technology ii with raid levels 0, 1, 10 lan two 10/100/1000 nics supporting intel ? i/o acceleration technology system fans two cpu 4-pin fan headers supporti ng two system blowers and one 3-pin fan header supporting a system fan system management support for intel ? system management software
intel ? server board s5000vcl tps product overview revision 2.3 intel order number: D64569-007 3 2.2 server board layout af002052 d e w v t s r q p o u j k l n b i h f g m x c z y a figure 1. components and connector location diagram description description a post code diagnostic leds o system fan header b system fault/status led p sata 0 c speaker q sata 1 d super slot (slot 6) r ssi 24-pin control panel header e external io connectors s cpu 1 fan header f main power connector t sata 2 / sas 0 g power supply auxiliary connector u sata 3 / sas 1 h cpu power connector v sata 4 / sas 2 i fbdimm slots w sata 5 / sas 3 j cpu socket 1 x battery k cpu socket 2 y sata sgpio l cpu 2 fan header z serial b port header m dual port usb 2.0 header not shown sas gpio (sas version of the server board only) n primary ide connector
product overview intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 4 2.2.1 intel ? light-guided diagnostics led locations af002053 b d f e c h g a description description a post-code diagonstic leds e cpu 2 fan fault led b system fault / status led f cpu 1 fan fault led c cpu 1 fault led g system fan fault led d dimm fault leds h 5 vsb led e cpu 2 fault led figure 2. intel ? light-guided diagnostics led locations
intel ? server board s5000vcl tps product overview revision 2.3 intel order number: D64569-007 5 2.2.2 external i/o connector locations af001640 nic1 10/100/ 1000 mb nic2 10/100/ 1000 mb serial a a c d e f g b network usb 0-1 figure 3. atx i/o layout
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 6 3. functional architecture the architecture and design of the intel ? server board s5000vcl is based on the intel ? 5000v chipset. the chipset is for systems based on the dual-core intel ? xeon ? processor 5100 series, low-voltage quad-core intel ? xeon ? processor 5300 series and low-voltage quad-core intel ? xeon ? processor 5400 series with system bus speeds of 1067 mhz and 1333 mhz. the chipset has two main components: the intel ? 5000v memory controller hub (mch) for the host bridge and the intel ? 6321esb i/o controller hub for the i/o subsystem. this chapter provides a high-level description of the functionality associated with each chipset component and the architectural blocks that make up this server board. for in depth information on each of the chipset components and each of the functional architecture blocks, see the intel ? 5000 series chipsets server board family datasheet .
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 7 ati* es1000 video 1333 mt/s gbe serial port b (internal) serial port a (back panel) sata0 sata1 pci-x* 64-bit/133 mhz pci-express x4 (esb2, port 1) pci-express x4 (esb2, port 2) super slot pata sata2 / sas0 sata3 / sas1 sata4 / sas2 sata5 / sas3 lsi* 1064e pci-x x4 figure 4. functional block diagram
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 8 3.1 intel ? 5000v memory controller hub (mch) the memory controller hub (mch) is a single 1432 pin fcbga package that includes these core platform functions: ? system bus interface for the processor sub-system ? memory controller ? pci express* ports including the ent erprise south bridge interface (esi) ? fbd thermal management ? smbus interface 3.1.1 system bus interface the mch is configured for symmetric multi-pr ocessing across two independent front side bus interfaces that connect to the processors. each front side bus on the mch uses a 64-bit wide 1066- or 1333-mhz data bus. the 1333-mhz data bus can transfer data at up to 10.66 gb/s. the mch supports a 36-bit wide address bus, c apable of addressing up to 64 gb of memory. the mch is the priority agent for both front side bus interfaces, and is optimized for one processor on each bus. 3.1.2 processor support the server board supports one or two dual-core intel ? xeon ? processors 5100 series or low voltage quad-core intel ? xeon ? processor 5300 series, or low voltage quad-core intel ? xeon ? processor 5400 series with system bus speeds of 1066 mhz, and 1333 mhz, and core frequencies starting at 1.6 ghz. previous generations of the intel ? xeon ? processor are not supported. for a complete list of supported processors, see the following link: http://support.intel .com/support/mother boards/server/s5000vcl note: only dual-core intel ? xeon ? processors 5100 series or low-voltage quad-core intel ? xeon ? processor 5300 and 5400 series, that support system bus speeds of 1066 mhz, and 1333 mhz are supported.
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 9 3.1.2.1 processor population rules when two processors are installed, both must be of identical revision, core voltage, and bus/core speed. when only one processor is installed, it must be in the socket labeled cpu1. the other socket must be empty. the board provides up to 90a max, 70a tdc per processor. processors with higher current requirements are not supported. 3.1.2.2 common enabling kit (cek) design support the server board complies with intel?s common enabling kit (cek) processor mounting and heat sink retention solution. the server board ships with a cek spring snapped onto the underside of the server board, beneath each processor socket. th e heat sink attaches to the cek, over the top of the processor and the thermal interface material (tim). see t he figure below for the stacking order of the chassis, cek spri ng, server board, tim, and heat sink. the cek spring is removable, allowing for the use of non-intel heat sink retention solutions. tp02091 heatsink assembly thermal interface material (tim) server board cek spring chassis af001010 figure 5. cek processor mounting
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 10 3.1.3 memory sub-system the mch masters two fully buffered dimm (f bdimm) memory channels. fbdimm memory utilizes a narrow high-speed fr ame-oriented interface referred to as a channel. the two channels are routed to six dimm slots and suppo rt registered ddr2- 667 fbdimm memory (stacked or unstacked). peak fbdimm memory data bandwidth in dual channel mode is 8.0gb/s (2x4.0 gb/s) with ddr2- 667/pc2-5300 (3.0 ns at cl5). dimm b3 dimm b2 dimm b1 dimm a3 dimm a2 dimm a1 channel a channel b af001011 figure 6. memory layout to boot the system, the system bios uses a dedicated i 2 c bus to retrieve dimm information needed to program the mch memory registers. table 1. i 2 c addresses for memory module smb device address dimm a1 0xa0 dimm a2 0xa2 dimm a3 a4 dimm b1 a0 dimm b2 a2 dimm b3 a4 3.1.3.1 supported memory up to six ddr2-667 fully-buffered di mms (fbd memory) can be installed. table 2. maximum six-dimm system memory configuration ? x4 single rank dram technology x4 single rank maximum capacity non-mirrored mode 256 mb 1.5 gb 512 mb 3 gb
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 11 1024 mb 6 gb 2048 mb 12 gb table 3. maximum six-dimm system memory configuration ? x8 dual rank dram technology x8 dual rank maximum capacity non-mirrored mode 256 mb 1.5 gb 512 mb 3 gb 1024 mb 6 gb 2048 mb 12 gb note : ddr2 dimms that are not fully bu ffered are not supported. see the intel ? server board s5000vcl tested memory list for a list of supported memory.
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 12 3.1.3.2 dimm population rules and supported dimm configurations dimm population rules depend on the operating m ode of the memory controller. the operating mode is determined by the number of dimms i nstalled. dimms must be populated in pairs in dimm slot order: a1 & b1, a2 & b2. dimms within a pair must be identical with respect to size, speed, and organization, but dimm capacities can be different across di fferent dimm pairs. note: the server board su pports single dimm m ode operation. intel w ill only validate and support this configuration with a single 512 mb x8 fbdimm installed in dimm slot a1. 3.2 intel ? 6321esb i/o controller hub the intel ? 6321esb i/o controller hub is a multi-func tion device that provides four distinct functions: an io controller, a pci-x* bridge, a gb ethernet controller, and a baseboard management controller (bmc). each function wi thin the controller hub has its own set of configuration registers. once configured, each appears to the system as a distinct hardware controller. the controller hub provides the gateway to all pc-compatible i/o devices and features. the server board uses these intel ? 6321esb i/o controller hub features: 1. pci-x* bus interface 2. six channel sata interface w/sata busy and fault led control 3. dual gbe mac 4. baseboard management controller (bmc) 5. single ata interface, with ultra dma 100 capability 6. universal serial bus 2.0 (usb) interface 7. removable media drives 8. lpc bus interface 9. pc-compatible timer/counter and dma controllers 10. apic and 8259 interrupt controller 11. power management 12. system rtc 13. vt technology 14. general purpose i/o for additional information, see the intel ? 5000 series chipsets server board family datasheet .
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 13 3.2.1 pci sub-system the primary i/o buses support one super slot connector, which supports one pci riser assembly that supports two pci slots: one low-pr ofile pci express* x8, and either a mid-height pci-x* 133, or one low-profile pci express*x 4 and one mid-height pci express x4. the pci bus complies with the pci local bus specification, revision 2.3. the pci-x bus complies with pci-x local bus specification, revision 2.0, the pci express ports comply with the pci express base specification, revision 1.0a. pci 32 supports the vga ati* es1000 video controller. table 4. pci bus segment characteristics pci bus segment voltage width speed type on-board device support pxa 6321esb 3.3v/5.0v 64 bit 133 mhz pci-x* full-height riser slot pe1, pe2 bnb pci express* ports 4, 5 3.3v x8 20 gb/s pci express* low-profile riser slot 3.2.1.1 pxa: 64-bit, 133mhz pci subsystem one 64-bit pci-x* bus segment is directed through the 6321esb ich6 . this pci-x segment, pxa, supports up to three pci add-in cards on the full-height riser card. 3.2.1.2 pe2: one x4 pci express* bus segment one x4 pci express* bus segment is directed through the 6321esb. this pci express segment, pe2, supports one x8 pci express segment to the proprietary i/o mo dule mezzanine connector. 3.2.1.3 pci riser slot the primary i/o buses for this server board supports one super slot connector which supports one pci riser assembly supporting two pci slots: ? one low-profile pci express* x8 and one mid-height pci-x* 133 ? or one low-profile pci express*x4 and one mid-height pci express* x4. 3.2.2 serial ata support the intel ? 6321esb i/o controller hub has an integr ated serial ata (sat a) controller that supports independent dma operation on six ports and supports data transfer rates of up to 3.0 gb/s. the six sata ports on the server board are numbered sata-0 thru sata-5. the sata ports can be enabled/di sabled and/or configured throu gh the bios setup utility.
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 14 3.2.2.1 intel ? embedded server raid technology support the embedded intel ? embedded server raid technology sol ution offers dat a stripping (raid level 0) and data mirroring (raid level 1). for higher performance, dat a stripping alleviates disk bottlenecks by taking advantage of the du al independent dma engines that each sata port offers. data mirroring is for data security. if a disk fa ils, a mirrored copied of the failed disk is brought on-line. there is no loss of either pci res ources (request/grant pair) or add-in card slots. intel ? embedded server raid technology fu nctionality requires these items: 15. intel ? 6321esb i/o controller hub 16. intel ? embedded server raid technology option rom 17. intel ? application accelerator raid editi on drivers, most recent revision ? at least two sata hard disk drives intel ? embedded server raid technology is not available in these configurations: 18. the sata controller in compatible mode ? intel ? embedded server raid technology has been disabled 3.2.3 parallel ata (pata) support the integrated ide controller of the 6321esb ich6 provides one ide channel. it redefines signals on the ide cable to allow both host and ta rget throttling of data and transfer rates of up to 100 mb/s. the ide channel provides optical dr ive support. the bios initializes and supports atapi devices such as ls-120/240, cd-rom, cd-rw and dvd-rom. the ide channel is accessed through a high-density 40-pin connector ((j2k5) that provides i/o signals. the ata channel can be configured a nd enabled or disabled throu gh the bios setup utility. 3.2.4 usb 2.0 support the usb controller functionality integrated in to the 6321esb provides the interface for up to four usb 2.0 ports. two external connectors ar e located on the back edge of the server board and one internal 2x5 header supports two optional usb 2.0 ports. 3.3 video support an ati* es1000 pci graphics accelerator wi th 16 mb of video ddr sdram and support circuitry for an embedded svga video sub-system is provided. the ati es1000 chip contains an svga video controller, clock generator, 2d engine, and ramdac in a 359-pin bga. one 4m x 16 x 4 bank ddr sdram chip provides 16 mb of video memory. the svga sub-system supports modes up to 1024 x 768 resolution in 8 / 16 / 32 bpp modes under 2d. it also supports both crt and lcd monitors up to a 100 hz vertical refresh rate. video is accessed using a standard 15-pin vga con nector found on the back edge of the server board. video signals are also made available through the 120-pin bridge-board connector that provides signals for an optional video connector on the control panel. video is routed to both the
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 15 rear video connector and a control panel video connector. video is present at both connectors simultaneously and cannot be disabled at either connector individually. video monitors can be hot-plugged. 3.3.1.1 video modes the ati* es1000 chip supports all standard ibm* vga modes. the table shows the 2d modes supported for both crt and lcd. table 5. video modes 2d video mode support 2d mode refresh rate (hz) 8 bpp 16 bpp 32 bpp 640x480 60, 72, 75, 85, 90, 100, 120, 160, 200 supported supported supported 800x600 60, 70, 72, 75, 85, 90, 100, 120, 160 supported supported supported 1024x768 60, 70, 72, 75, 85, 90, 100 supported supported supported 1152x864 43, 47, 60, 70, 75, 80, 85 supported supported supported 1280x1024 60, 70, 74, 75 supported supported supported 1600x1200 52 supported supported supported 3.3.1.2 video memory interface the memory controller sub-system of the es1000 arbitrates requests from the direct memory interface, the vga graphics controller, the dr awing co-processor, the display controller, the video scalar, and the hardware cursor. requests ar e serviced in a manner that ensures display integrity and maximum cpu/co-p rocessor drawing performance. the server board supports a 16 mb (4 meg x 16 -bit x four banks) ddr sdram device for video memory. 3.4 network interface controller (nic) network interface support is provided from th e built in dual gbe mac features of the 6321esb in conjunction with the intel ? 82563eb compact physical layer transceiver (phy). together, they provide support for dual lan ports designed for 10/100/1000 mbps operation. the 82563eb device is based upon proven phy technology integrated into intel?s gigabit ethernet controllers. the physical layer circ uitry provides a standard ieee 802.3 ethernet interface for 1000base-t, 100base-tx, and 10base-t applications (802.3, 802.3u, and 802.3ab). the 82563eb device can transmit and receive data at rates of 1000 mbps, 100 mbps, or 10 mbps.
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 16 each network interface controller (nic) dri ves two leds located on each network interface connector. the link/activity led at the right of t he connector indicates network connection when on, and transmit/receive activity when blinking. the speed led at the left indicates 1000-mbps operation when amber, 100-mbps operation when green, and 10-mbps when off. table 6. nic2 status led led color led state nic state off 10 mbps green 100 mbps green/amber (left) amber 1000 mbps on active connection green (right) blinking transmit / receive activity 3.4.1 intel ? i/o acceleration technolgy intel ? i/o acceleration technology moves net work data efficiently through intel ? xeon ? processor-based servers for improved application responsiveness across diverse operating systems and virtualized environments. intel ? i/oat improves network application responsiveness by unleashing the power of intel ? xeon ? processors through efficient network data movement and reduced system overhead. intel multi-port network adapters with intel i/oa t provide high-performance i/o for server consolidation and virtualization vi a stateless network acceleration that seamlessly scales across multiple ports and virtual machines. intel i/oat provides safe and flexible network acceleration through tight integration into popular operatin g systems and virtual machine monitors, avoiding the support risks of third-party network stac ks and preserving existing network requirements such as teaming and failover. 3.5 super i/o legacy i/o support is provided by a national semiconductor* pc87427 super i/o device. this chip contains the necessary circ uitry to support these functions: ? gpios ? serial ports ? keyboard and mouse support ? wake up control ? system health support
intel ? server board s5000vcl tps functional architecture revision 2.3 intel order number: D64569-007 17 3.5.1.1 serial ports the server board provides an external db9 serial port and an internal serial header. table 7. serial a port header pin-out (external db9) rj45 signal abbreviation db9 1 request to send rts 7 2 data terminal ready dtr 4 3 transmitted data td 3 4 signal ground sgnd 5 5 ring indicator ri 9 6 received data rd 2 7 dcd or dsr dcd/dsr 1 or 6 (see note) 8 clear to send cts 8 table 8. internal serial b port header pin-out pin signal name serial port a header pin-out 1 dcd 2 dsr 3 rx 4 rts 5 tx 6 cts 7 dtr 8 ri 9 gnd note: the rj45-to-db9 adapter should match the co nfiguration of the serial device used. one of two pin-out configurations is used, depending on whether the se rial device requires a dsr or dcd signal. the final adapter configuration s hould also match the desired pin-out of the rj45 connector, as it can also be configured to support either dsr or dcd. 3.5.1.2 floppy disk controller the server board does not support a floppy disk contr oller (fdc) interface, but the system bios recognizes usb floppy devices.
functional architecture intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 18 3.5.1.3 keyboard and mouse support dual stacked ps/2 ports on the back edge of the server board support a keyboard and mouse. either port can support a mouse or keyboard. neither port supports hot plugging. 3.5.1.4 wake-up control the super i/o contains functionality allows events to power-on and power-off the system. 3.5.1.5 system health support the super i/o provides an interface via gpio s for bios and system management firmware to activate the diagnostic leds, the fru fault indi cator leds for processors, fbdimms, fans, and the system status led. see section 7 to locate the leds.
intel ? server board s5000vcl tps platform management revision 2.3 intel order number: D64569-007 19 4. platform management the platform management sub-system is b ased on the integrated baseboard management controller (bmc) features of the intel ? 6321esb i/o controller hub. the onboard platform management subsystem consists of communication buses, sensors, system bios, and system management firmware. see appendix b for onboard sensor data. for ad ditional platform management information see the intel ? 5000 series chipsets server board family datasheet . lm4 figure 7. smbus block diagram
connector / header locations and pin-outs intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 20 5. connector / header locations and pin-outs 5.1 board connectors table 9. board connector matrix connector quantity server board reference designators connector type pin count power supply 3 j9e1 j9b1 j9c1 cpu power main power p/s aux 8 24 5 cpu 2 j8h1, j5h1 cpu sockets 771 main memory 8 j7a2, j7a3, j7a4, j7a5, j8a2, j8a3 dimm sockets 240 super slot 1 j4b2 card edge 98 ide 1 j2k5 shrouded header 40 cpu blowers #1 and #2 2 j2k3, j2k4 header 4 system fan 2 j1k1 header 3 battery 1 xbt3e1 battery holder 3 keyboard/mouse 1 j9a2 ps2, stacked 12 rear usb 2 j9a2 external 4 serial port a 1 j8a1 external 9 serial port b 1 j1a1 header 9 video connector 1 j7a1 external, d-sub 15 lan connector 10/100/1000 2 ja6a1, ja5a1 external lan connector with built-in magnetic 14 ssi control panel 1 j2k2 header 24 internal usb 1 j3k1 header 10 serial ata (sata) 2 j1j1, j1j2 header 7 sata/sas 4 j1g2, j1g1, j1f1, j1e4 header 7 system recovery setting jumpers 4 j1c2, j1c4 jumper 3
intel ? server board s5000vcl tps connector / header locations and pin-outs revision 2.3 intel order number: D64569-007 21 5.2 power connectors the main power supply connection is obtained using an ssi compliant 2x12 pin connector (j9b1). two additional power related connector s; one ssi compliant 2x4 pin power connector (j9e1) supports additional 12v. one ssi compliant 1x5 pin connector (j9c1) provides i 2 c monitors the power supply. table 10. power connector pin-out (j3k3) pin signal color pin signal color 1 +3.3vdc orange 13 +3.3vdc orange 2 +3.3vdc orange 14 -12vdc blue 3 gnd black 15 gnd black 4 +5vdc red 16 ps_on# green 5 gnd black 17 gnd black 6 +5vdc red 18 gnd black 7 gnd black 19 gnd black 8 pwr_ok gray 20 rsvd_(-5v) white 9 5vsb purple 21 +5vdc red 10 +12vdc yellow 22 +5vdc red 11 +12vdc yellow 23 +5vdc red 12 +3.3vdc orange 24 gnd black table 11. 12v power connector pin-out (j9e1) pin signal color 1 gnd black 2 gnd black 3 gnd black 4 gnd black 5 +12vdc yellow/black 6 +12vdc yellow/black 7 +12vdc yellow/black 8 +12vdc yellow/black
connector / header locations and pin-outs intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 22 table 12. power supply signal connector pin-out (j9c1) pin signal color 1 smb_clk_esb_fp_pwr_r orange 2 smb_dat_esb_fp_pwr_r black 3 smb_alrt_3_esb_r red 4 3.3v sense- yellow 5 3.3v sense+ green 5.3 riser card slots the server board has one riser card slot. the riser card slot is capable of supporting one riser card that supports one pci-x* 133 full-height / mid-length add-in card and one low-profile pci express* x8 add-in-card. 5.4 ssi control panel connector the server board provides a 24-pin ssi control panel connector (j2k2) for use with non-intel chassis. the following table provi des the pin-out for this connector. table 13. front panel ssi standard 24-pin connector pin-out (j2k2) pin signal name control panel pin-out pin signal name 1 p3v3_stby 2 p3v3_stby 3 key 4 p5v_stby 5 fp_pwr_led_l 6 fp_id_led_l 7 p3v3 8 fp_status_led1_r 9 hdd_led_act_r 10 fp_status_led2_r 11 fp_pwr_btn_l 12 lan_act_a_l 13 gnd 14 lan_linka_l 15 reset button 16 ps_i2c_3vsb_sda 17 gnd 18 ps_i2c_3vsb_scl 19 fp_id_btn_l 20 fp_chassis_intru 21 temp_sensor 22 lan_act_b_l 23 fp_nmi_btn_l 24 lan_linkb_l o o o o o o o o o o o o o o o o o o o intruder o o nmi o o o o o o o o o o smbus lan a link / act system fault sleep button id led id button power led cool fault hdd led power button reset button lan b link / act
intel ? server board s5000vcl tps connector / header locations and pin-outs revision 2.3 intel order number: D64569-007 23 5.5 i/o connector pinout definition 5.5.1 vga connector the following table details the pin- out of the vga connector (j7a1). table 14. vga connector pin-out (j7a1) pin signal name description 1 v_io_r_conn red (analog color signal r) 2 v_io_g_conn green (analog color signal g) 3 v_io_b_conn blue (analog color signal b) 4 tp_vid_conn_b4 no connection 5 gnd ground 6 gnd ground 7 gnd ground 8 gnd ground 9 tp_vid_conn_b9 no connection 10 gnd ground 11 tp_vid_conn_b11 no connection 12 v_io_ddcdat ddcdat 13 v_io_hsync_conn hsync (horizontal sync) 14 v_io_vsync_conn vsync (vertical sync) 15 v_io_ddcclk ddcclk 5.5.2 nic connectors the server board provides two rj45 nic conne ctors oriented side-by-s ide on the back edge of the board (ja6a1, ja5a1). the pin-ou t for each connector is identical. table 15. rj-45 10/100/1000 nic connector pin-out (ja6a1, ja5a1) pin signal name pin signal name 1 gnd 9 nic_a_mdi0p 2 p1v8_nic 10 nic_a_mdi0n 3 nic_a_mdi3p 11 (d1) nic_linka_1000_n (led 4 nic_a_mdi3n 12 (d2) nic_linka_100_n (led) 5 nic_a_mdi2p 13 (d3) nic_act_led_n 6 nic_a_mdi2n 14 nic_link_led_n 7 nic_a_mdi1p 15 gnd 8 nic_a_mdi1n 16 gnd
connector / header locations and pin-outs intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 24 5.5.3 ide connector the server board includes an ide connector that supports a single slimline optical drive such as a cd-rom or dvd-rom drive. the connector has 44 pins providing support for both power and i/o singles. table 16. 44-pin ide connector pin-out (j2k5) pin signal name pin signal name 1 esb_plt_rst_ide_n 2 gnd 3 ride_dd_7 4 ride_dd_8 5 ride_dd_6 6 ride_dd_9 7 ride_dd_5 8 ride_dd_10 9 ride_dd_4 10 ride_dd_11 11 ride_dd_3 12 ride_dd_12 13 ride_dd_2 14 ride_dd_13 15 ride_dd_1 16 ride_dd_14 17 ride_dd_0 18 ride_dd_15 19 gnd 20 key 21 ride_ddreq 22 gnd 23 ride_diow_n 24 gnd 25 ride_dior_n 26 gnd 27 ride_piordy 28 gnd 29 ride_ddack_n 30 gnd 31 irq_ide 32 tp_pide_32 33 ride_da1 34 ide_pri_cblsns 35 ride_da0 36 ride_da2 37 ride_dcs1_n 38 ride_dcs3_n 39 led_ide_n 40 gnd
intel ? server board s5000vcl tps connector / header locations and pin-outs revision 2.3 intel order number: D64569-007 25 5.5.4 sata connectors the server board provides two sata (serial at a) connectors: sata-0 (j1j2), sata-1 (j1j1), and four sata (serial ata) / sas (serial-atta ched scsi) connectors: sata-2 / sas-0 (j1g2), sata-3 / sas-1 (j1g1), sa ta-4 / sas-2 (j1f1), and sata-5 / sas-3 (j1e4). table 17. sata connector pin-out (j1j2, j1j1) pin signal name description 1 gnd gnd1 2 sata#_tx_p_c positive side of transmit differential pair 3 sata#_tx_n_c negative side of transmit differential pair 4 gnd gnd2 5 sata#_rx_n_c negative side of receive differential pair 6 sata#_rx_p_c positive side of receive differential pair 7 gnd gnd3 table 18. sata / sas connector pin-out (j1g2, j1g1, j1f1, j1e4) pin signal name description 1 gnd gnd1 2 sata#_tx_p_c positive side of transmit differential pair 3 sata#_tx_n_c negative side of transmit differential pair 4 gnd gnd2 5 sata#_rx_n_c negative side of receive differential pair 6 sata#_rx_p_c positive side of receive differential pair 7 gnd gnd3
connector / header locations and pin-outs intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 26 5.5.5 serial port connectors the server board provides one external 9-pin serial ?a? port (j8a1) and one internal 9-pin serial b port header (j1a1). the following tables define the pin-outs for each. table 19. 9-pin serial header pin-out (j8a1, j1a1) pin signal name description 1 spa_dcd dcd (carrier detect) 2 spa_dsr dsr (data set ready) 3 spa_sin rxd (receive data) 4 spa_cts cts (clear to send) 5 tp_spa_ri ri (ring indicate) 6 spa_rts rts (request to send) 7 spa_sout sout (serial out) 8 spa_dtr dtr (data terminal ready) 9 gnd ground 5.5.6 keyboard and mouse connector two stacked ps/2 ports (j9a2) are support bo th a keyboard and a mouse. either ps/2 port can support a mouse or a keyboard. the following tabl e details the pin-out of the ps/2 connector. table 20. stacked ps/2 keyboard and mouse port pin-out (j9a2) pin signal name description 1 kb_data_f keyboard data 2 nc no connect 3 gnd ground 4 p5v_kb_f keyboard / mouse power 5 kb_clk_f keyboard clock 6 nc no connect 7 ms_data_f mouse data 8 nc no connect 9 gnd ground 10 p5v_kb_f keyboard / mouse power 11 ms_clk_f mouse clock 12 nc no connect 13 gnd ground 14 gnd ground 15 gnd ground 16 gnd ground 17 gnd ground
intel ? server board s5000vcl tps connector / header locations and pin-outs revision 2.3 intel order number: D64569-007 27 5.5.7 usb connector the following table details the pin-out of the external usb connectors (j9a2) found on the back edge of the server board. table 21. external usb connector pin-out (j9a2) pin signal name description 1 usb_oc1_lan usb_power 2 usb_p1n_lan datal1 (differentia l data line paired with datah1) 3 usb_p1p_lan datah1 (different ial data line paired with datal1) 4 gnd ground 5 usb_oc0_lan usb_power 6 usb_p0n_lan datah0 (different ial data line paired with datal0) 7 usb_p0p_lan datah0 (different ial data line paired with datal0) 8 gnd ground one 2x5 connector on the server board (j3k1) provi des an option to support an additional usb 2.0 port. table 22. internal usb connector pin-out (j3k1) pin signal name description 1 p5v usb power 2 p5v usb power 3 usb_esb_p5n usb port 5 negative signal 4 usb_esb_p4n usb port 4 negative signal 5 usb_esb_p5p usb port 5 positive signal 6 usb_esb_p4p usb port 4 positive signal 7 ground ground 8 ground ground 9 -- no pin 10 nc no conncet
connector / header locations and pin-outs intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 28 5.6 fan headers the server board incorporates a system fan circui t that supports two ssi compliant 4-pin fan connectors and one 3-pin connector. the 3-pin connec tor (j1k1) is for system cooling fans. the two 4-pin fan connectors are for processor cooling fans: cpu1 fan (j2k3) and cpu2 fan (j2k4). the 4-pin connectors can support cpu fans that draw a maximum of 1.2 amps each. the system fan connectors can be found towards the front edge of the server board, cpu1 fan (j2k3), cpu2 fan (j2k4) and system fan (j1k1). these connectors support a maximum fan load of 3.5 amps each. with the proper s ensor data record (sdr) installed, intel ? system management software can monitor all system fans in use. the pin configuration for each fan connector is identical. table 23. cpu fan connector pin-out (j2k3, j2k4) pin signal name type description 1 ground gnd ground is the power supply ground 2 12v power power supply 12v 3 fan tach out fan_tach signal is connected to the bmc to monitor the fan speed 4 fan pwm in fan_pwm signal to control fan speed table 24. pci fan connector pin-out (j1k1) pin signal name type description 1 ground gnd ground is the power supply ground 2 12v power power supply 12v 3 fan tach out fan_tach signal is connected to the bmc to monitor the fan speed note : intel corporation server baseboards support peripheral components and contain a number of high-density vlsi and power delivery components that need adequate airflow to cool. intel?s own chassis are designed and tested to meet the intended thermal requirements of these components when the fully integrat ed system is used t ogether. it is the responsibility of the system integrator that chooses not to use in tel developed server building blocks to consult vendor datasheets and operating parameters to de termine the amount of air flow required for their specific application and environmental conditions. intel corporation can not be held responsible if components fail or the server b oard does not operate correctly when used outside any of their published operating or non-operating limits.
intel ? server board s5000vcl tps jumper block settings revision 2.3 intel order number: D64569-007 29 6. jumper block settings the server board has several 3-pin jumper blocks that can be used to configure, protect, or recover specific features of the server board. pin 1 on each jumper block is denoted by ? ?. 6.1 recovery jumper blocks table 25. recovery jumpers (j3a1, j1c1, j1c2) jumper name pins what happens at system reset? 1-2 bmc firmware force update mode ? disabled (default) j3a1: bmc force update 2-3 bmc firmware force update mode ? enabled 1-2 these pins should have a jumper in pl ace for normal system operation. (default) j1c4: password clear 2-3 if these pins are jumpered, administrator and user passwords will be cleared on the next reset. these pins should not be jumpered for normal operation. 1-2 these pins should have a jumper in pl ace for normal system operation. (default) j1c2: cmos clear 2-3 if these pins are jumpered, the cmos settings will be cleared on the next reset. these pins should not be jumpered for normal operation
jumper block settings intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 30 af001016 3 cmos clr 1-2: normal operation (default) 2-3: clear cmos j1c2 3 3 password clr 1-2: normal operation (default) 2-3: clear password j1c4 3 force update j3a1 33 2-3: enabled 1-2: disabled figure 8. recovery jumper blocks (j3a1, j1c2, j1c4) 6.1.1 cmos clear and password reset usage procedure the cmos clear and password reset recovery f eatures are designed for minimal system down time. the usage procedure for these two features has changed from previous generation intel server boards. the following procedur e outlines the new usage model. 1. power down and remove ac power. 2. open server. 3. move jumper from the default operating position (pins1-2) to the reset/clear position (pins 2-3). 4. wait 5 seconds. 5. move jumper back to default position (pins 1-2). 6. close the server chassis. 7. reconnect ac and power up the server. the password and/or cmos is cleared and can be reset in bios setup.
intel ? server board s5000vcl tps jumper block settings revision 2.3 intel order number: D64569-007 31 6.1.2 bmc force update procedure when performing a standard bmc firmware u pdate procedure, the update utility places the bmc into an update mode, allowing the firmware to load safely onto the flash device. in the unlikely event that the bmc firmware update proc ess fails due to the bmc not being in the proper update state, the server board provides a bmc force update jumper which will force the bmc into the proper update state. the following pr ocedure should be following in the event the standard bmc firmware update process fails. 1. power down and remove ac power. 2. open the server. 3. move jumper from the default operating position (pins1-2) to the enabled position (pins 2-3). 4. close the server chassis. 5. reconnect ac and power up the server. 6. perform the bmc firmware update procedure that is documented in readme.txt file that is included in the given bmc firmware update package. 7. after successful completion of the firmwa re update process, the firmware update utility may generate an error stating that the bmc is still in update mode. 8. power down and remove the ac power. 9. open the server. 10. move the jumper from the enabled position (p ins 2-3) to the disabled position (pins 1-2). 11. close the server chassis. 12. reconnect ac and power up the server. note: normal bmc functionality is disabled with the force bmc update jumper set to the ?enabled? position. the server should never be run with the bmc force update jumper set in this position and should only be used when the standard firmware update process fails. this jumper should remain in the default ? disabled position when the server is running normally. 6.2 bios select jumper the jumper block located at j3a 2, is used to select which bi os image the system will boot to. pin 1 on the jumper is identified by ? ?. this jumper should only be moved to force the bios to boot to the secondary bank, which may hold a different version of bios. the rolling bios feature of the server board will automatically alternate the boot bios to the secondary bank if the bios image in the primary bank is corrupted and cannot boot.
jumper block settings intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 32 table 26. bios select jumper (j3a2) pins what happens at system reset? 1-2 force bios to bank 2 2-3 system is configured for normal operation (bank 1) (default) 6.3 pcie select jumper the jumper block located at j1e1 is used to select which pci express* speed to use. pin 1 on the jumper is identified by ? ?. this jumper will need to be moved to support the pci express speed. table 27. pci express* x4/x8 select jumper (j1e1) pins description 1-2 pci express* two x4 2-3 pci express one x8 (default)
intel ? server board s5000vcl tps intel? light guided diagnostics revision 2.3 intel order number: D64569-007 33 7. intel ? light guided diagnostics the server board has several on-board diagnostic leds to assist in troubleshooting board-level issues. this section shows the location of each led and provides a high level-usage description. for a more detailed description of what drives the diagnostic led operation, see the intel ? 5000 series chipsets server board family datasheet. 7.1 5-volt standby system status / fault led several system management features of this se rver board require that 5-volt standby voltage be supplied from the power supply. the bmc within the 6321esb, and onboard nics require this voltage be present when the system is of f. the 5-volt standby system status led is illuminated when ac power is applied to the platform and 5-volt standby voltage is supplied to the server board by the power supply. see the figure below to locate this led. af00164 2 system status / fault led figure 9. system status / fault led location
intel? light guided diagnostics intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 34 when the ac power is first applied to the system and 5-volt standby is present, the bmc on the server board requires 15-20 seconds to initialize. during this time, the system status led blinks amber and green, and the power button functionali ty is disabled, preventing the server from powering up. once bmc initialization has complet ed, the status led will stop blinking and the power button functionality is restored and can be used to turn on the server. the bi-color 5v standby system status led operates as follows: color state criticality description off n/a not ready ac power off green / amber alternating blink not ready pre-dc power on ? 15-20 second bmc initialization when ac is applied to the server. control panel buttons are disabled until the bmc initialization is complete. green solid on system ok system booted and ready. green blink degraded system degraded ? unable to use all of the insta lled memory (more than one dimm installed). ? correctable errors over a th reshold of 10 and migrating to a spare dimm (memory sparing). th is indicates that the user no longer has spared dimms indicating a redundancy lost condition. corresponding dimm led should light up. ? in mirrored configuration, when memory mirroring takes place and system loses memory redundancy. this is not covered by the bullet above. ? redundancy loss such as power-supply or fan. this does not apply to non-redundant sub-systems. ? pci-e link errors ? cpu failure / disabled ? if there are two processors and one of them fails ? fan alarm ? fan failure. number of operational fans should be more than minimum number needed to cool the system ? non-critical threshold crossed ? temperature and voltage amber blink non-critical non-fatal alarm ? system is likely to fail ? critical voltage threshold crossed ? vrd hot asserted ? minimum number of fans to cool the system not present or failed ? in non-sparing and non-mirroring mode if the threshold of ten correctable errors is crossed within the window amber solid on critical, non- recoverable fatal alarm ? system has failed or shutdown ? dimm failure when there is one dimm present, no good memory present ? run-time memory uncorrectabl e error in non-redundant mode ? ierr signal asserted ? processor 1 missing ? temperature (cpu thermtrip, memory temphi, critical threshold crossed) ? no power good ? power fault ? processor configuration error (f or instance, processor stepping mismatch)
intel ? server board s5000vcl tps intel? light guided diagnostics revision 2.3 intel order number: D64569-007 35 7.2 dimm leds the server board provides a memory fault led for each dimm slot. the dimm fault led is illuminated when the system bios disables the specified dimm afte r it reaches a specified number of given failures or if specific cr itical dimm failures are detected. see the intel ? 5000 series chipsets server board family datasheet . af001525 a figure 10. dimm led locations
intel? light guided diagnostics intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 36 7.3 post code diagnostic leds during the system boot process, bios executes a number of platform configuration processes, each of which is assigned a specific hex post code number. as each configuration routine is started, bios will display the given post co de to the post code diagnostic leds found on the back edge of the server board. to assist in troubleshooting a system hang during the post process, the diagnostic leds can be used to identify the last post process to be executed. see appendix c for a complete description of ho w these leds are read, and for a list of all supported post codes. tp02312 figure 11. post code diagnostic led location
intel ? server board s5000vcl tps power and environmental specifications revision 2.3 intel order number: D64569-007 37 8. power and environmental specifications 8.1 intel ? server board s5000vcl design specifications operating the server board at condition s beyond those shown in the table may cause permanent damage to the system. exposure to absolute maximum rating conditions for extended periods may affect system reliability. table 28. server board design specifications operating temperature 0o c to 55o c 1 (32o f to 131o f) non-operating temperature -40o c to 70o c (-40o f to 158o f) dc voltage 5% of all nominal voltages shock (unpackaged) trapezoidal, 50 g, 170 inches/sec shock (packaged) < 20 lbs 20 to < 40 40 to < 80 80 to < 100 100 to < 120 120 36 inches 30 inches 24 inches 18 inches 12 inches 9 inches vibration (unpackaged) 5 hz to 500 hz 3.13 g rms random operating temperature 5o c to 50o c 1 (32o f to 131o f) non-operating temperature -40o c to 70o c (-40o f to 158o f) dc voltage 5% of all nominal voltages shock (unpackaged) trapezoidal, 50 g, 170 inches/sec shock (packaged) ( 40 lbs to < 80 lbs) 24 inches vibration (unpackaged) 5 hz to 500 hz 3.13 g rms random note: 1 the chassis design must provide proper airf low to avoid exceeding the dual-core intel ? xeon ? processor 5100 series or quad-core inte l? xeon? processor 5300 series maximum case temperature. disclaimer note : intel corporation server boards support add-in peripherals and contain a number of high-density vlsi and power delivery components that need adequate airflow to cool. intel ensures through its own chassis development and testing that when intel server building blocks are used t ogether, the fully integrated system will meet the intended thermal requirements of these components. it is the responsibility of th e system integrator who chooses not to use intel developed server building block s to consult vendor datasheets and operating parameters to determine the amount of air fl ow required for their specific application and environmental conditions. intel corporation cannot be held responsible, if components fail or the server board does not operate correctly when us ed outside any of their published operating or non-operating limits.
power and environmental specifications intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 38 8.2 baseboard powe r requirements this section provides power supply design guidelines for a system using the intel ? server board s5000vcl, including voltage and current specifi cations and power supply on/off sequencing characteristics. 8.2.1 processor power support the server board supports the thermal design point (tdp) guideline for dual-core intel ? xeon ? processors 5100 series and quad-core intel ? xeon ? processor 5300 series. the flexible motherboard guidelines (fmb) has also been fo llowed to help determine the suggested thermal and current design values for ant icipating future processor needs. the following table provides maximum values for icc, tdp power and t case for the dual-core intel ? xeon ? processor 5100 series family and quad-core intel ? xeon ? processor 5300 series family. table 29. dual-core intel ? xeon ? processor 5100 series and quad-core intel? xeon? processor 5300 series tdp guidelines tdp power max tcase icc max 108 w 70o c 90 a note: these values are for reference only. the dual-core intel ? xeon ? processor 5100 series and quad-core intel ? xeon ? processor 5300 series datasheet contains the actual specifications for the processor. if the values found in the dual-core intel ? xeon ? processor 5100 series datasheet are different than those published here, the dual-core intel ? xeon ? processor 5100 series datasheet values will supersede thes e, and should be used. 8.2.2 power supply output requirements this section is for reference purposes only. its intent is to provide guidance to system designers for determining a proper power supply for use wi th this server board. the contents of this section specify the power supply requirements intel used to develop a power supply for its 1u server system. the following table defines power and current ratings for this 400 w power supplies. the combined output power of all outputs shall not exceed the rated output power. the power supply must meet both static and dynamic vo ltage regulation requirements for the minimum loading conditions.
intel ? server board s5000vcl tps power and environmental specifications revision 2.3 intel order number: D64569-007 39 table 30. 400w load ratings voltage minimum continuous maximum continuous peak +3.3 v 1 1.5 a 10 a +5 v 1 1.0 a 20 a +12 v 2 0.5 a 16 a 18 a +12 v 3 0.5 a 16 a 18 a +12 v 4 0.5 a 16 a +12 v 5 0.5 a 16 a -12 v 0 a 0.5 a +5 vsb 0.1 a 3.0 a 3.5 a notes: 1. combined 3.3 v and 5 v power shall not exceed 100 w. 2. maximum continuous total dc output power should not exceed 400 w. 3. peak load on the combined 12 v output shall not exceed 49 a. 4. maximum continuous load on the combined 12 v output shall not exceed 44 a. 5. peak total dc output power should not exceed 650 w. 6. peak power and current loading shall be supported for a minimum of 12 seconds. 8.2.3 turn on no load operation at power on the system shall present a no load condition to the power supply. in this no load state the voltage regulation limits for the 3.3v and 5v are relaxed to +/-10% and the +12v rails relaxed to +10/-8%. when operating loads ar e applied the voltages must regulated to there normal limits. table 31. no-load operating range voltage minimum continuous maximum continuous peak +3.3 v 0 a 7 a +5 v 0 a 5 a +12 v 1 0 a 5 a 7 a +12 v 2 0 a 5 a 7 a +12 v 3 0 a 6 a +12 v 4 0 a 5 a -12 v 0 a 0.5 a +5 vsb 0.1 a 3.0 a 3.5 a notes: 1. maximum continuous total dc output power should not exceed 400 w. 2. peak load on the combined 12 v output shall not exceed 49 a. 3. maximum continuous load on the combined 12 v output shall not exceed 44 a. 4. peak total dc output power should not exceed 650 w.
power and environmental specifications intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 40 8.2.4 grounding the grounds of the pins of the power supply output connector provide the power return path. the output connector ground pins shall be connect ed to safety ground (power supply enclosure). this grounding should be well designed to ensure passing the maximum allowed common mode noise levels. the power supply shall be provided with a re liable protective earth ground. all secondary circuits shall be connected to protective earth ground. resistance of the ground returns to chassis shall not exceed 1.0 m . this path may be used to carry dc current. 8.2.5 standby outputs the 5 vsb output shall be present when an ac input greater than the power supply turn on voltage is applied. 8.2.6 remote sense the power supply has remote sense return (retur ns) to regulate out ground drops for all output voltages: +3.3 v, +5 v, +12 v1, +12 v2, + 12 v3, -12 v, and 5 vsb. the power supply uses remote sense (3.3 vs) to regulate out drops in the system for the +3.3 v output. the +5 v, +12 v1, +12 v2, +12 v3, ?12 v and 5 vsb outputs only use remote sense referenced to the returns signal. the remote sense input impedance to the power supply must be greater than 200 on 3.3 vs and 5 vs; this is the value of the resistor connecting the remote sense to the output voltage internal to the power supply. remote sense must be able to regulate out a minimum of a 200 mv drop on the +3.3 v output. the remote sense return (returns) must be able to regulate out a minimum of a 200 mv drop in the power ground return. the current in any remote sense line shall be less than 5 ma to prevent voltage sensing errors. the power suppl y must operate within specification over the full range of voltage drops from the power supply?s output connector to the remote sense points. 8.2.7 voltage regulation the power supply output voltages must stay with in the following voltage limits when operating at steady state and dynamic loading conditions. the se limits include the peak-peak ripple/noise. table 32. voltage regulation limits parameter tolerance minimum nominal maximum units + 3.3v - 5% / +5% +3.14 +3.30 +3.46 v rms + 5v - 5% / +5% +4.75 +5.00 +5.25 v rms + 12v - 5% / +5% +11.40 +12.00 +12.60 v rms - 12v - 5% / +9% -11.40 -12.00 -13.08 v rms + 5vsb - 5% / +5% +4.75 +5.00 +5.25 v rms
intel ? server board s5000vcl tps power and environmental specifications revision 2.3 intel order number: D64569-007 41 8.2.8 dynamic loading the output voltages shall remain within limit s for the step loading and capacitive loading specified in the table below. the load transient repetition rate shall be tested between 50 hz and 5 khz at duty cycles ranging from 10%-90%. t he load transient repetition rate is only a test specification. the step load may occur anywhere with in the min load to the max load conditions. table 33. transient load requirements output step load size (see note 2) load slew rate test capacitive load +3.3 v 6.0 a 0.25 a/ sec 250 f +5 v 4.0 a 0.25 a/ sec 400 f 12 v 18.0 a 0.25 a/ sec 2200 f 1, 2 +5 vsb 0.5 a 0.25 a/ sec 20 f notes : 1. step loads on each 12 v output may happen simultaneously. 2. the +12 v should be tested with 2200 f evenly split between the four +12 v rails. 8.2.9 capacitive loading the power supply shall be stable and meet a ll requirements with the following capacitive loading ranges. table 34. capacitive loading conditions output minimum maximum units +3.3 v 250 6,800 f +5 v 400 4,700 f +12 v 500 each 11,000 f -12 v 1 350 f +5 vsb 20 350 f 8.2.10 closed-loop stability the power supply shall be unconditionally stable under all line/load/transient load conditions including capacitive load ranges. a minimum of : 45 degrees phase margin and -10 db gain margin is required. the power supply manufactur er shall provide proof of the unit?s closed-loop stability with local sensing throug h the submission of bode plots. closed-loop stability must be ensured at the maximum and minimum loads as applicable. 8.2.11 common mode noise the common mode noise on any output shall not exceed 350 mv pk-pk over the frequency band of 10 hz to 30 mhz.
power and environmental specifications intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 42 ? the measurement shall be made across a 100 ? resistor between each of the dc outputs, including ground, at the dc power connector and chassis ground (power subsystem enclosure). ? the test set-up shall use an fet probe such as tektronix* model p6046 or equivalent. 8.2.12 ripple / noise the maximum allowed ripple/noise output of the pow er supply is defined in the following table. this is measured over a bandwidth of 0 hz to 20 mhz at the power supply output connectors. a 10 f tantalum capacitor in parallel with a 0.1 f ceramic capacitor are placed at the point of measurement. table 35. ripple and noise +3.3 v +5 v +12 v -12 v +5 vsb 50mvp-p 50mvp-p 120mvp-p 120mvp-p 50mvp-p 8.2.13 soft starting the power supply shall contain a control circui t which provides a monotonic soft start for its outputs without overstress of the ac line or any power supply components at any specified ac line or load conditions. there is no requirement for rise time on the 5 v standby, but the turn on/off shall be monotonic. 8.2.14 timing requirements these are the timing requirements for the powe r supply operation. the output voltages must rise from 10% to within regulation limits (t vout_rise ) within 5 to 70 ms, except for 5vsb; it is allowed to rise from 1.0 to 25 ms. all outputs must rise monotonically . each output voltage shall reach regulation within 50 ms (t vout_on ) of each other during turn on of the power supply. each output voltage shall fall out of regulation within 400 msec (t vout_off ) of each other during turn off. the following diagrams show the ti ming requirements for the power supply being turned on and off via the ac input with pson held low, and the pson signal with the ac input applied. table 36. output voltage timing item description minimum maximum units t vout_rise output voltage rise time from ea ch main output. 5.0 * 70 * msec t vout_on all main outputs must be within regulation of each other within this time. 50 msec t vout_off all main outputs must leave regulation within this time. 400 msec *the 5 vsb output voltage rise time shall be from 1.0 ms to 25.0 ms
intel ? server board s5000vcl tps power and environmental specifications revision 2.3 intel order number: D64569-007 43 af001023 v out v1 v2 v3 v4 t vout_on t vout_rise 10% v out t vout_off figure 12. output voltage timing table 37. turn on/off timing item description minimum maximum units t sb_on_delay delay from ac being applied to 5vsb being within regulation. 1500 msec t ac_on_delay delay from ac being applied to all output voltages being within regulation. 2500 msec t vout_holdup time all output voltages stay within regulation after loss of ac. measured at 75% of maximum load. 21 msec t pwok_holdup delay from loss of ac to de- assertion of pwok. measured at 75% of maximum load. 20 msec t pson_on_delay delay from pson # active to output voltages within regulation limits. 5 400 msec t pson_pwok delay from pson # deactive to pwok being de-asserted. 50 msec t pwok_on delay from output voltages within regulation limits to pwok asserted at turn on. 100 500 msec t pwok_off delay from pwok de-asserted to output voltages (3.3v, 5v, 12v, -12v) dropping out of regulation limits. 1 msec t pwok_low duration of pwok being in the de-asserted state during an off/on cycle using ac or the pson signal. 100 msec t sb_vout delay from 5vsb being in regulation to o/ps being in regulation at ac turn on. 50 1000 msec t 5vsb_holdup time the 5vsb output voltage stays within regulation after loss of ac. 70 msec
power and environmental specifications intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 44 v out ac input pwok 5 vsb pson af001024 t vout_holdup t ac_on_delay t sb_on_delay t pwok_on ac turn on/off cycle pson turn on/off cycle t sb_vout t 5vsb_holdup t pwok_holdup t pwok_off t pwok_low t pson_on_delay t sb_on_delay t pwok_on t pwok_off t pson_pwok figure 13. turn on/off timing (power supply signals) 8.2.15 residual voltage immunity in standby mode the power supply shall be immune to any resi dual voltage placed on its outputs (typically a leakage voltage through the system from standby output) up to 500 mv. there shall be no additional heat generated, nor stress of any inter nal components with this voltage applied to any individual output, and all outputs simultaneously. it also should not trip the power supply protection circuits during turn on. residual voltage at the power supply outputs for a no load condition shall not exceed 100 mv when ac voltage is applied and the pson# signal is de-asserted.
intel ? server board s5000vcl tps regulatory and certification information revision 2.3 intel order number: D64569-007 45 9. regulatory and certification information warning to ensure regulatory compliance, you must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing pr oduct certifications and approvals. use only the described, regulated components specified in this guide. use of other products / components will void the ul listing and othe r regulatory approvals of the prod uct and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold. to help ensure emc compliance with your local regional rules and regulations, before computer integration, make sure that the chassis, power supply, and other modules have passed emc testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. the final configuration of your en d system product may require additional emc compliance testing. for more information please contact your local intel representative. this is an fcc class a device. integration of it into a class b chassis does not result in a class b device. 9.1 product regulatory compliance intended application ? this product was evaluated as in formation technology equipment (ite), which may be installed in offices, schools, computer rooms, and similar commercial type locations. the suitability of this product for other product categories and environments (such as: medical, industrial, telecommunications, nebs, re sidential, alarm systems, test equipment, etc.), other than an ite application, may require further evaluation. this is an fcc class a device. integration of it into a class b chassis does not result in a class b device. 9.1.1 product safety compliance ? ul60950 ? csa 60950 (usa / canada) ? en60950 (europe) ? iec60950 (international) ? cb certificate & report, iec60950 (report to include all country national deviations) ? gost r 50377-92 ? listed on one system license (russia) ? belarus license ? listed on system license (belarus) ? ce - low voltage direct ive 73/23/eee (europe) ? iram certificati on (argentina)
regulatory and certification information intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 46 9.1.2 product emc compliance ? class a compliance ? fcc /ices-003 - emissions (usa/canada) verification ? cispr 22 ? emissions (international) ? en55022 - emissions (europe) ? en55024 - immunity (europe) ? ce ? emc directive 89/336/eec (europe) ? vcci emissions (japan) ? as/nzs 3548 emissions (australia / new zealand) ? bsmi cns13438 emissions (taiwan) ? gost r 29216-91 emissions - listed on one system license (russia) ? gost r 50628-95 immunity ?listed on one system license (russia) ? belarus license ? listed on one system license (belarus) ? rrl mic notice no. 1997-41 (emc) & 1997-42 (emi) (korea) 9.1.3 certifications / registrations / declarations ? ul certification or nrtl (us/canada) ? ce declaration of confor mity (cenelec europe) ? fcc/ices-003 class a att estation (usa/canada) ? c-tick declaration of conformity (australia) ? med declaration of conf ormity (new zealand) ? bsmi certification (taiwan) ? gost ? listed on one system license (russia) ? belarus ? listed on one sy stem license (belarus) ? rrl certification (korea) ? ecology declaration (international)
intel ? server board s5000vcl tps regulatory and certification information revision 2.3 intel order number: D64569-007 47 9.2 product regulatory compliance markings the server board is provided with the following regulatory marks . regulatory compliance region marking ul mark usa/canada ce mark europe emc marking (class a) canada canada ices-003 class a canada nmb-003 classe a bsmi marking (class a) taiwan c-tick marking australia / new zealand rrl mic mark korea country of origin exporting requirements made in xxxxx (provided by label, not silk screen) model designation regulatory identification examples (intel ? server board s5000vcl) for boxed type boards; or board pb number for non- boxed boards (typically high-end boards)
regulatory and certification information intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 48 9.3 electromagnetic compatibility notices 9.3.1 fcc verification statement (usa) this device complies with part 15 of the fcc rule s. operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. intel corporation 5200 n.e. elam young parkway hillsboro, or 97124-6497 phone: 1-800-628-8686 this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. th ese limits are designed to provide reasonable protection against harmful interference in a re sidential installation. this equipment generates, uses, and can radiate radio frequen cy energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particu lar installation. if this equipment does cause harmful interference to radio or televisi on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of these measures: ? reorient or relocate the receiving antenna. ? increase the separation between the equipment and the receiver. ? connect the equipment into an outlet on a circui t different from that to which the receiver is connected. ? consult the dealer or an experienced radio/tv technician for help. any changes or modifications not expressly appr oved by the grantee of this device could void the user?s authority to operate the equipment. the customer is responsible for ensuring compliance of the modified product. all cables used to connect to peripherals must be shielded and grounded. operation with cables, connected to peripherals that are not shielded and grounded may result in interference to radio and tv reception.
intel ? server board s5000vcl tps regulatory and certification information revision 2.3 intel order number: D64569-007 49 9.3.2 ices-003 (canada) cet appareil numrique respecte les limites bruits radiolectriques applicables aux appareils numriques de classe b prescrites dans la norme sur le matriel brouilleur: ?appareils numriques?, nmb-003 dicte par le ministre canadian des communications. english translation of the notice above: this digital apparatus does not exceed the class b limits for radio noise emissions from digital apparatus set out in the interference-causing equi pment standard entitled ?digital apparatus,? ices-003 of the canadian depa rtment of communications. 9.3.3 europe (ce declaration of conformity) this product has been tested in accordance too, and complies with the low voltage directive (73/23/eec) and emc directive (89/336/eec). t he product has been marked with the ce mark to illustrate its compliance. 9.3.4 vcci (japan) english translation of the notice above: this is a class b product based on the standard of the voluntary control council for interference (vcci) from information technology equipment. if this is used near a radio or television receiver in a domestic environment, it may cause radio interference. install and use the equipment according to the instruction manual.
regulatory and certification information intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 50 9.3.5 bsmi (taiwan) the bsmi certification marking and emc warning is located on the outside rear area of the product. 9.3.6 rrl (korea) following is the rrl certification information for korea. english translation of the notice above: 1. type of equipment (model name): on license and product 2. certification no.: on rrl certificate. obtain certificate from local intel representative 3. name of certification recipient: intel corporation 4. date of manufacturer: refer to date code on product 5. manufacturer/nation: intel corporation/refer to country of origin marked on product 9.3.7 cnca (ccc-china) the ccc certification marking and emc warn ing is located on the outside rear area of the product.
intel ? server board s5000vcl tps regulatory and certification information revision 2.3 intel order number: D64569-007 51 9.4 restriction of hazardous substances (rohs) compliance intel has a system in place to restrict the use of banned substances in accordance with the european directive 2002/95/ec. compliance is based on declaration that materials banned in the rohs directive are either (1) below all app licable substance threshold limits or (2) an approved/pending rohs exemption applies. note: rohs implementing details are not fully defined and may change. threshold limits and banned substances are noted below. ? quantity limit of 0.1% by mass (1000 ppm) for: - lead - mercury - hexavalent chromium - polybrominated biphenyl s diphenyl ethers (pbde) ? quantity limit of 0.01% by mass (100 ppm) for: - cadmium
appendix a: integration and usage tips intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 52 appendix a: integration and usage tips ? when adding or removing components or peripherals from the server board, ac power must be removed. with ac power plugged into the server board, 5-volt standby is still present even though the server board is powered off. ? when two processors are installed, both mu st be of identical revision, core voltage, and bus/core speed. mixed processor steppi ngs is supported. however, the stepping of one processor can not be greater then one stepping back of the other. ? processors must be installed in order. cpu 1 is located near the edge of the server board and must be populated to operate the board. ? only fully buffered dimms (fbd) are supported on this server board. for a list of supported memory for this server board, see the intel ? server board s5000vcl tested memory list . ? for a list of intel supported operating systems, add-in cards, and peripherals for this server board, see the intel ? server board s5000vcl tested hardware and os list. ? only dual-core intel ? xeon ? processors 5100 series or low- voltage quad-core intel ? xeon ? processor 5300 series, with system bus speeds of 1066, or 1333 mhz are supported on this server board. previous generation intel ? xeon ? processors are not supported. ? for a complete list of supported processors, see the following link: http://support.intel.com/support/motherboards/server/s5000vcl ? removing ac power before performing t he cmos clear operat ion will cause the system to automatically power up and i mmediately power down after the procedure is followed and ac power is re-applied. if this happens remove the ac power cord again, wait 30 seconds, and then reconnect the ac power cord. power up the system and proceed to the bios setup ut ility to reset desired settings. ? normal bmc functionality is disabled with the force bmc update jumper set to the ?enabled? position (pins 2-3). the server should never be run with the bmc force update jumper set in this position and should only be used when the standard firmware update process fails. this jumper should remain in the default (disabled) position (pins 1-2) when the server is running normally. ? when performing a bios update, the bios select jumper must be set to its default position (pins 2-3).
intel ? server board s5000vcl tps appendix b: sensor tables revision 2.3 intel order number: D64569-007 53 appendix b: sensor tables this appendix lists the sensor identification num bers and information regar ding the sensor type, name, supported thresholds, assertion and de-asserti on information, and a brief description of the sensor purpose. see the intelligent platform management interface specification, version 1.5 , for sensor and event/reading-type table information. ? sensor type the sensor type references the values enumerated in the sensor type codes table in the ipmi specification. it provides the context in which to interpret the sensor, e.g., the physical entity or characteristic that is represented by this sensor. ? event / reading type the event/reading type references values from the event/reading type code ranges and generic event/reading type codes tables in the ipmi specification . note that digital sensors are a specific type of discrete sensors, which have only two states. ? event offset/triggers event thresholds are ?supported event generatin g thresholds? for threshold types of sensors. - [u,l][nr,c,nc] upper nonrecoverable, upper critical, upper noncritical, lower nonrecoverable, lower critical, lower noncritical - uc, lc upper critical, lower critical event triggers are ?supported event generating offsets? for discrete type sensors. the offsets can be found in the generic event/reading type codes or sensor type codes tables in the ipmi specificati on, depending on whether the sensor event/reading type is generic or a sensor specific response. ? assertion / de-assertion enables assertion and de-assertion indicators reveal the type of events the sensor can generate: - as: assertions - de: de-assertion ? readable value / offsets - readable value indicates the type of value returned for threshold and other non- discrete type sensors. - readable offsets indicate the offsets for discrete sensors that are readable via the get sensor reading command. unless otherwise in dicated, all event triggers are readable, i.e., readable offsets consists of the reading type offsets that do not generate events.
appendix b: sensor tables intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 54 ? event data this is the data that is included in an event message generated by the associated sensor. for threshold-based sensors, these abbreviations are used: - r: reading value - t: threshold value ? rearm sensors - the rearm is a request for the event status for a sensor to be rechecked and updated upon a transition between good and bad states. rearming the sensors can be done manually or automatically. this column indicates the type supported by the sensor. the following abbreviations are used in the comment column to describe a sensor: a: auto-rearm m: manual rearm ? default hysteresis - hysteresis setting applies to all threshol ds of the sensor. this column provides the count of hysterisis for the sensor, which can be 1 or 2 (positive or negative hysteresis). ? criticality - criticality is a classification of the severity and nature of the condition. it also controls the behavior of the control panel status led. ? standby - some sensors operate on standby power. these sensors may be accessed and / or generate events when the main (system) power is off, but ac power is present.
intel ? server board s5000vcl tps appendix c: post error messages and handling revision 2.3 intel order number: D64569-007 55 appendix c: post error messages and handling whenever possible, the bios will output the cu rrent boot progress codes on the video screen. progress codes are 32-bit quantities plus optiona l data. the 32-bit numbers include class, subclass, and operation information. the class and sub class fields point to the type of hardware that is being initialized. the oper ation field represents the specific initialization activity. based on the data bit availability to display progress c odes, a progress code can be customized to fit the data width. the higher the data bi t, the higher the granularity of in formation that can be sent on the progress port. the progress codes may be reported by the system bi os or option roms. the response section in the table is divided into two types: ? pause: the message is displayed in the error manager screen, an error is logged to the sel, and user input is required to conti nue. the user can take immediate corrective action or choose to continue booting. ? halt: the message is displayed in the error manager screen, an error is logged to the sel, and the system cannot boot unless the erro r is resolved. the user needs to replace the faulty part and restart the system. table 38. post error messages and handling error code error message response 004c keyboard / interface error pause 0012 cmos date / time not set pause 5220 configuration cleared by jumper pause 5221 passwords cleared by jumper pause 5223 configuration default loaded pause 0048 password check failed halt 0141 pci resource conflict pause 0146 insufficient memory to shadow pci rom pause 8110 processor 01 internal error (ierr) on last boot pause 8111 processor 02 internal error (ierr) on last boot pause 8120 processor 01 thermal trip error on last boot pause 8121 processor 02 thermal trip error on last boot pause 8130 processor 01 disabled pause 8131 processor 02 disabled pause 8160 processor 01 unable to apply bios update pause 8161 processor 02 unable to apply bios update pause 8190 watchdog timer failed on last boot pause 8198 operating system boot watchdog timer expired on last boot pause 0192 l3 cache size mismatch halt 0194 cpuid, processor family are different halt 0195 front side bus mismatch pause 0197 processor speeds mismatched pause 8300 baseboard management controller failed self-test pause 8306 front panel controller locked pause
appendix c: post error messages and handling intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 56 error code error message response 8305 hotswap controller failed pause 84f2 baseboard management controller failed to respond pause 84f3 baseboard management controller in update mode pause 84f4 sensor data record empty pause 84ff system event log full pause 8500 memory component could not be conf igured in the selected ras mode. pause 8520 dimm_a1 failed self test (bist). pause 8521 dimm_a2 failed self test (bist). pause 8522 dimm_a3 failed self test (bist). pause 8523 dimm_a4 failed self test (bist). pause 8524 dimm_b1 failed self test (bist). pause 8525 dimm_b2 failed self test (bist). pause 8526 dimm_b3 failed self test (bist). pause 8527 dimm_b4 failed self test (bist). pause 8528 dimm_c1 failed self test (bist). pause 8529 dimm_c2 failed self test (bist). pause 852a dimm_c3 failed self test (bist). pause 852b dimm_c4 failed self test (bist). pause 852c dimm_d1 failed self test (bist). pause 852d dimm_d2 failed self test (bist). pause 852e dimm_d3 failed self test (bist). pause 852f dimm_d4 failed self test (bist). pause 8540 memory component lost redundancy during the last boot. pause 8580 dimm_a1 correctable ecc error encountered. pause 8581 dimm_a2 correctable ecc error encountered. pause 8582 dimm_a3 correctable ecc error encountered. pause 8583 dimm_a4 correctable ecc error encountered. pause 8584 dimm_b1 correctable ecc error encountered. pause 8585 dimm_b2 correctable ecc error encountered. pause 8586 dimm_b3 correctable ecc error encountered. pause 8587 dimm_b4 correctable ecc error encountered. pause 8588 dimm_c1 correctable ecc error encountered. pause 8589 dimm_c2 correctable ecc error encountered. pause 858a dimm_c3 correctable ecc error encountered. pause 858b dimm_c4 correctable ecc error encountered. pause 858c dimm_d1 correctable ecc error encountered. pause 858d dimm_d2 correctable ecc error encountered. pause 858e dimm_d3 correctable ecc error encountered. pause 858f dimm_d4 correctable ecc error encountered. pause 8600 primary and secondary bios ids do not match. pause 8601 override jumper is set to force boot fr om lower alternate bios bank of flash rom pause 8602 watchdog timer expired (secondary bios may be bad!) pause 8603 secondary bios checksum fail pause
intel ? server board s5000vcl tps appendix c: post error messages and handling revision 2.3 intel order number: D64569-007 57 post error beep codes the following table lists post error beep codes. prior to system video initialization, the bios uses these beep codes to inform users on error conditions. the beep code is followed by a user visible code on post progress leds. table 39. post error beep codes beeps error message post progress code description 3 memory error system halted because a fatal error related to the memory was detected. 6 bios rolling back error the system has detected a co rrupted bios in the flash part, and is rolling back to the last good bios. the bmc may generate beep codes upon detection of failure conditions. beep codes are sounded each time the problem is discovered, such as on each power-up attempt, but are not sounded continuously. codes that are common across all intel ? server boards and systems that use the intel ? 5000 series chipsets are listed in table 40. each digit in the code is represented by a sequence of beeps whose count is equal to the digit. table 40. bmc beep codes code reason for beep associated sensors supported? 1-5-2-1 cpu: empty slot / population error ? processor slot 1 is not populated. cpu population error yes 1-5-2-2 cpu: no processors (terminators only) n/a no 1-5-2-3 cpu: configuration erro r (e.g., vid mismatch) n/a no 1-5-2-4 cpu: configuration error (e.g., bsel mismatch) n/a no 1-5-4-2 power fault: dc power unexpectedly lost (power good dropout) power unit ? power unit failure offset yes 1-5-4-3 chipset control failure n/a no 1-5-4-4 power control fault power unit ? soft power control failure offset yes
appendix d: post code diagnostic led decoder intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 58 appendix d: post code diagnostic led decoder during the system boot, the bios executes platfo rm configuration processes, each of which is assigned a specific hex post code number. as each configuration routine is started, the bios displays the post code on the post code diagno stic leds on the back edge of the server board. the diagnostic leds identify the last post process to be executed. each post code is represented by a combination of colors from the four leds. the leds are capable of displaying three color s: green, red, and amber. the post codes are divided into an upper nibble and a lower nibble. each bit in t he upper nibble is represented by a red led and each bit in the lower nibble is represented by a green led. if both bits are set in the upper and lower nibbles then both the red and green leds are lit, resulting in an amber color. if both bits are clear, then the led is off. example: the bios sends a value of ach to the diagnostic led decoder. the leds are decoded as: ? red bits = 1010b = ah ? green bits = 1100b = ch since the red bits correspond to the upper nibbl e and the green bits correspond to the lower nibble, the two are concatenated as ach. table 41. example post progress code led 8h 4h 2h 1h leds red green red green red green red green ach 1 1 0 1 1 0 0 0 result amber green red off msb lsb figure 14. diagnostic led placement diagram lsb msb diagnostic leds back edge of baseboard usb port usb port
intel ? server board s5000vcl tps appendix d: post code diagnostic led decoder revision 2.3 intel order number: D64569-007 59 table 42. diagnostic led post code decoder diagnostic led decoder g=green, r=red, a=amber checkpoint msb lsb description host processor 0x10h off off off r power-on initialization of the host processor (bootstrap processor) 0x11h off off off a host processor cache initialization (including ap) 0x12h off off g r starting application processor initialization 0x13h off off g a smm initialization chipset 0x21h off off r g initializing a chipset component memory 0x22h off off a off reading configurat ion data from memory (spd on dimm) 0x23h off off a g detecting presence of memory 0x24h off g r off programming timing par ameters in the memory controller 0x25h off g r g configuring memory parameters in the memory controller 0x26h off g a off optimizing memory controller settings 0x27h off g a g initializing memory, such as ecc init 0x28h g off r off testing memory pci bus 0x50h off r off r enumerating pci busses 0x51h off r off a allocating resources to pci busses 0x52h off r g r hot plug pci controller initialization 0x53h off r g a reserved for pci bus 0x54h off a off r reserved for pci bus 0x55h off a off a reserved for pci bus 0x56h off a g r reserved for pci bus 0x57h off a g a reserved for pci bus usb 0x58h g r off r resetting usb bus 0x59h g r off a reserved for usb devices ata / atapi / sata 0x5ah g r g r resetting pata / sata bus and all devices 0x5bh g r g a reserved for ata smbus 0x5ch g a off r resetting smbus 0x5dh g a off a reserved for smbus local console 0x70h off r r r resetting the video controller (vga) 0x71h off r r a disabling the video controller (vga) 0x72h off r a r enabling the video controller (vga) remote console 0x78h g r r r resetting the console controller 0x79h g r r a disabling the console controller 0x7ah g r a r enabling the console controller
appendix d: post code diagnostic led decoder intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 60 diagnostic led decoder g=green, r=red, a=amber checkpoint msb lsb description keyboard (ps2 or usb) 0x90h r off off r resetting the keyboard 0x91h r off off a disabling the keyboard 0x92h r off g r detecting the presence of the keyboard 0x93h r off g a enabling the keyboard 0x94h r g off r clearing keyboard input buffer 0x95h r g off a instructing keyboard c ontroller to run self test (ps2 only) mouse (ps2 or usb) 0x98h a off off r resetting the mouse 0x99h a off off a detecting the mouse 0x9ah a off g r detecting the presence of mouse 0x9bh a off g a enabling the mouse fixed media 0xb0h r off r r resetting fixed media device 0xb1h r off r a disabling fixed media device 0xb2h r off a r detecting presence of a fixed media device (ide hard drive detection, etc.) 0xb3h r off a a enabling / configuring a fixed media device removable media 0xb8h a off r r resetting removable media device 0xb9h a off r a disabling removable media device 0xbah a off a r detecting presence of a removable media device (ide cdrom detection, etc.) 0xbch a g r r enabling / configuring a removable media device boot device selection 0xd0 r r off r trying boot device selection 0xd1 r r off a trying boot device selection 0xd2 r r g r trying boot device selection 0xd3 r r g a trying boot device selection 0xd4 r a off r trying boot device selection 0xd5 r a off a trying boot device selection 0xd6 r a g r trying boot device selection 0xd7 r a g a trying boot device selection 0xd8 a r off r trying boot device selection 0xd9 a r off a trying boot device selection 0xda a r g r trying boot device selection 0xdb a r g a trying boot device selection 0xdc a a off r trying boot device selection 0xde a a g r trying boot device selection 0xdf a a g a trying boot device selection pre-efi initialization (pei) core 0xe0h r r r off started dispatching early initialization modules (peim) 0xe2h r r a off initial memory found, configured, and installed correctly
intel ? server board s5000vcl tps appendix d: post code diagnostic led decoder revision 2.3 intel order number: D64569-007 61 diagnostic led decoder g=green, r=red, a=amber checkpoint msb lsb description 0xe1h r r r g reserved for initialization module use (peim) 0xe3h r r a g reserved for initialization module use (peim) driver execution environment (dxe) core 0xe4h r a r off entered efi driver execution phase (dxe) 0xe5h r a r g started dispatching drivers 0xe6h r a a off started connecting drivers dxe drivers 0xe7h r a a g waiting for user input 0xe8h a r r off checking password 0xe9h a r r g entering bios setup 0xeah a r a off flash update 0xeeh a a a off calling int 19. one beep unless silent boot is enabled. 0xefh a a a g unrecoverable boot failure / s3 resume failure runtime phase / efi operating system boot 0xf4h r a r r entering sleep state 0xf5h r a r a exiting sleep state 0xf8h a r r r operating system has requested efi to close boot services (exitbootservices ( ) has been called) 0xf9h a r r a operating system has switched to virtual address mode (setvirtualaddressmap ( ) has been called) 0xfah a r a r operating system has requested the system to reset (resetsystem () has been called) pre-efi initialization module (peim) / recovery 0x30h off off r r crisis recovery has been initiated because of a user request 0x31h off off r a crisis recovery has been initiated by software (corrupt flash) 0x34h off g r r loading crisis recovery capsule 0x35h off g r a handing off control to the crisis recovery capsule 0x3fh g g a a unable to complete crisis recovery.
appendix e: supported intel? server chassis intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 62 appendix e: supported intel ? server chassis the intel ? server board s5000vcl/s5000vclr (sata) is supported in these intel 1u high density rack mount server systems: intel ? server system sr1530cl/sr1530clr and intel ? server system sr1530hcl/sr1530hclr. the intel ? server board s5000vclsasbb/bbs5000vcl sasr (sas) is supported in the intel ? server system sr1530hcls/sr1530hclsr. see the intel ? server systems sr1535cl/sr1530hcl/sr1530hcls and sr1535clr/sr1530hclr/sr1530hclsr technical product specification for more information. af001026 f g h a b d e c i a a rack handles f 400 watt power supply b slimline drive bay (drive not included) g processor air duct c power supply fans h fan modules d intel ? server board s5000vcl i hard drive bays (drives not included) e pci add-in riser assembly figure 15. intel ? server system sr1530cl/sr1530clr
intel ? server board s5000vcl tps appendix e: supported intel? server chassis revision 2.3 intel order number: D64569-007 63 af001612 a m l k j e f b h i g a d c a rack handles h 400 w power supply b air baffle i front panel board c power supply fans j control panel d processor air duct k hard drive bays (drives not included) e full-height pci riser card l opti cal drive bay (drive not included) f low-profile pci riser card m hard drive bay (drive not included) g intel ? server board s5000vcl figure 16. intel ? server system sr1530hcl/sr1530hclr
glossary intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 64 glossary term definition acpi advanced configuration and power interface ap application processor apic advanced programmable interrupt control asic application specific integrated circuit asmi advanced server management interface bios basic input/output system bist built-in self test bmc baseboard management controller bridge circuitry connecting one computer bus to anot her, allowing an agent on one to access the other bsp bootstrap processor byte 8-bit quantity. cbc chassis bridge controller (a microcontroller co nnected to one or more other cbcs, together they bridge the ipmb buses of multiple chassis. cek common enabling kit chap challenge handshake authentication protocol cmos in terms of this specification, this describes the pc-at compatible region of battery-backed 128 bytes of memory, which normally resides on the server board. dpc direct platform control eeprom electrically erasable programmable read-only memory ehci enhanced host controller interface emp emergency management port eps external product specification esb2 enterprise south bridge 2 fbd fully buffered dimm fmb flexible mother board frb fault resilient booting fru field replaceable unit fsb front side bus gb 1024mb gpio general purpose i/o gtl gunning transceiver logic hsc hot-swap controller hz hertz (1 cycle/second) i2c inter-integrated circuit bus ia intel ? architecture ibf input buffer ich i/o controller hub icmb intelligent chassis management bus ierr internal error ifb i/o and firmware bridge intr interrupt ip internet protocol
intel ? server board s5000vcl tps glossary revision 2.3 intel order number: D64569-007 65 term definition ipmb intelligent pla tform management bus ipmi intelligent platform management interface ir infrared itp in-target probe kb 1024 bytes kcs keyboard controller style lan local area network lcd liquid crystal display led light emitting diode lpc low pin count lun logical unit number mac media access control mb 1024kb mch memory controller hub md2 message digest 2 ? hashing algorithm md5 message digest 5 ? hashing algorithm ? higher security ms milliseconds mttr memory type range register mux multiplexor nic network interface controller nmi nonmaskable interrupt obf output buffer oem original equipm ent manufacturer ohm unit of electrical resistance pef platform event filtering pep platform event paging pia platform information area (this feature config ures the firmware for the platform hardware) pld programmable logic device pmi platform management interrupt post power-on self test psmi power supply management interface pwm pulse-width modulation ram random access memory rasum reliability, availability, serviceability, usability, and manageability risc reduced instruction set computing rom read only memory rtc real-time clock (component of ich peripheral chip on the server board) sdr sensor data record secc single edge connector cartridge seeprom serial electrically erasable programmable read-only memory sel system event log sio server input/output smi server management interrupt (smi is the highest priority nonmaskable interrupt) smm server management mode
glossary intel ? server board s5000vcl tps intel order number: D64569-007 revision 2.3 66 term definition snmp simple network management protocol tbd to be determined tim thermal interface material uart universal asynchronous receiver/transmitter udp user datagram protocol uhci universal host controller interface utc universal time coordinare vid voltage identification vrd voltage regulator down word 16-bit quantity zif zero insertion force
intel ? server board s5000vcl tps reference documents revision 2.3 intel order number: D64569-007 67 reference documents ? intel ? 5000 series chipsets server board family datasheet

▲Up To Search▲

Price & Availability of D64569-007

	To Download D64569-007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .